24Vdc Power supply of NASN POWER can be provided from one of 2 sources: an industrial AC network of 220 V, 50 Hz; a direct current source (battery).AC power is supplied to the inputs of the power supplies (rectifiers). The battery powers product when there is no AC voltage at the rectifier inputs.A

NASN Switched mode rectifiers are used in modular technology to convert the three-phase/ single-phase 400/230V AC voltage into the required DC voltage 24VDC. The used rectifier modules RM2475-B can be added or replaced at any time during operation of the system (hot-plug technology). The rectifie

The 48VDC Power Rectifier system 48KW 1050A consists of the following parts:- Switch mode type rectifier modules 48V75A*14pcs and Supervisory Control Module*1pcs.- AC Circuit Breakers for Rack Input.- Surge Protectors at the rack input & within the Rectifier Modules on the input side.- Fuses for Out

The 110Vdc 40A rectifier system parallel 2pcs rectifier modules with 110Vdc 20A to be 40A maximumly. At least two 19"(hot plug-in) rectifier modules in parallel to facilitate power system upgrades.

NASN A series rectifier power supply converts alternating current (AC) into direct current (DC) by allowing a current to flow through the device in one direction only.AC to DC Rectifier power supply available models 220Vac to 48Vdc rectifier, 220Vac to 24Vdc rectifier, 220Vac to 110Vdc rectifier, 22

NASN A series rectifier converts alternating current (AC) into direct current (DC) by allowing a current to flow through the device in one direction only.

19 Inch 1U 48V 60A Rectifier on A Telecommunications DC Power Supply SMPS Rack is compact and light weight with 2pcs 1U 48V/30A rectifier modules. By utilizing TCP/IP technology, complete configuration and monitoring of power equipment is possible through a Windows Internet Explorer browser.The sub

NASN 19-inch width embedded DC power system 48VDC 450A (Model No.:A380/48-450M11) composes of eleven pcs 2U height hot swappable 48V 50A modular rectifier module and can provide power to -48 V series communication equipment, which include the AC Power Distribution , DC Power Distribution, rectifier

Industrial Battery charger is to convert power from AC main power or the oil generator to DC power and re-charging the UPS batteries at the same time maintains float voltage, handles overloads and buffers surges. It provides uninterrupted power supply to critical load equipment.19-inch width embedd