Rectifier Battery Charger 110V 120A in electrical substation

Rectifier Battery charger is to convert power from AC main power or the oil generator to DC power and re-charging the batteries at the same time maintains float voltage, handles overloads and buffers surges.  It provides uninterrupted power supply to critical load equipment in electrical substation.

19-inch width embedded DC power system and can provide power to 110 V series communication equipment, which include the AC Power Distribution , DC Power Distribution, rectifier modules and controller and AC Surge Protection Device, DC Surge Protection Device.

Power system's rectifier and controller have same size. Rectifier is constant output power control and the rated output power is 3,000W. The battery charger support wide voltage input, high adaptive to poor grid to protect battery. The operating range is 75VAC~295VAC (±5V). When input voltage in the range of 185Vac~290Vac, the output is 20A.  When in the range of 75Vac ~ 185Vac, half output.

When Main Power is available, it should charge the batteries and supply continuous power to the load.

During Power Failure the Load will take power from 110VDC Battery directly without any interruption.

The charger is settable in voltage and current, it’s for maintenance and recharge of these battery bank from normal and also deep discharges.