Views: 0 Author: Site Editor Publish Time: 2025-02-04 Origin: Site
NASN POWER EPV charging facilities are followed following technical requirements. The key technical characteristics of EPV charging station are presented in the below Table.
| Operating temperature | -20°C to +50°C | |
| Compliance and safety | GB/T 18487. 1-2015 | |
| GB/T 20234. 1-2015 | ||
| GB/T 20234. 3-2015 | ||
| GB/T 27930. 1-2015 | ||
| GB/T 27930. 1-2015 | ||
| IP Protection | IP54 | |
| Input AC power | 3 Phase | |
| connection | ||
| Input voltage range | 380VAC +/- 10% | |
| Maximum input current | 242A | |
| Input frequency | 50 Hz | |
| Power factor (full load) | > 0.99 | |
| Total harmonic distortion | < 5% | |
| Input built-in over-current | Yes | |
| and earth leakage | ||
| protection | ||
| Input built-in isolating | Yes | |
| switch | ||
| Efficiency | > 97% at nominal output power | |
| Maximum output power | 180 kW | |
| Output current range | 0-250A | |
| Output voltage range | 250 - 850V DC | |
| Output over-current | Yes | |
| protection | ||
| Output short-circuit | Yes | |
| protection | ||
| DC cable length | 5m | |
| Monitor and display | - Battery voltage and ampere (real time) | |
| - | State of Charge | |
| - | Charging History Log | |
| - | Fault History Log | |
| - | Touch screen | |
| Control: | ||
| Protocol | OCPP 1.6 (JSON) | |
| Load Management | Enabled (supporting OCPP Charging Profile) | |
| Networking | LAN 10/100 | |
| Warranty | 1 year | |