ST5048
NASN POWER
ST5048
ST5048
21A
4000W
60A
98% MAX
482*240*88mm
8Kg
220V
154~265Vac;185~264Vac
| Availability: | |
|---|---|
MPPT efficiency 98%;
Auto restart when AC in recovering;
RS232 communication port & BMS RS485;
WIFI and GPRS optional;
Built in transformer, avoid overload and over voltage protection.
| MODEL | ST5048 | ST6348 | ST8048 | ST10048 | ST12548 |
| Input | |||||
| Capacity (VA) | 5000VA | 6300VA | 8000VA | 10000VA | 12500VA |
| Voltage (DC) | 48V | 48V | 48V | 48V | 48V |
| Nominal Voltage | 220VAC/110VAC | ||||
| Voltage Range | 154-264VAC/77-132VAC | ||||
| Frequency | 50-60Hz Auto sensing | ||||
| Output | |||||
| Watt | 4000W | 5000W | 6400W | 8000W | 10000w |
| Voltage | 220VAC/110VAC | ||||
| Frequency | 50/60Hz | ||||
| Waveform | Pure sine wave | ||||
| Transfer time(AC to DC) | <8ms | ||||
| Transfer time(DC to AC) | <8ms | ||||
| Output voltage regulation | 10%rms | ||||
| Bypass Mode | Yes | ||||
| Saver Mode | Yes | ||||
| Efficiency | >98% | ||||
| Protection | |||||
| Input Protection | Circuit Breaker | ||||
| Output Protection | Circuit Breaker | ||||
| Battery | |||||
| Battery Type | AGM - Deep Cycle,GEL,LIFEPO4 | ||||
| Up to 500Ah | |||||
| Charging current | 20A | 29A | 39A | 50A | 60A |
| Low Level disconnect(Selectable) | 48V:(40V or 42V) | ||||
| LCD Indicator status | Input AC,Output AC | ||||
| Battery DC,Output Load | |||||
| Alarm,Fault | |||||
| Battery Charge Level | |||||
| Output Frequency | |||||
| LED Indicator status | AC Line In:Green | ||||
| Inverter:Green | |||||
| Charging:Yellow | |||||
| Alarm:Red | |||||
| Battery low alarm | 48V:battery light discharge 46V;battery load discharge 46V@load<20%; | ||||
| 44V@load>50%/42V@load>50%; | |||||
| Battery low recovery | 48V:battery light discharge 48V;battery load discharge 48V@load<20%; | ||||
| 46V@load>50%/44V@load>50%; | |||||
| DC low voltage shutdown | 48V:battery light discharge 44V;battery load discharge 44V@load<20%; | ||||
| 42V@load>50%/40V@load>50%; | |||||
| DC high voltage alarm and fault | 64V | ||||
| DC high voltage recovery | 60V | ||||
| Maximum PV array power | 3200W | 6400W | |||
| MPPT/PWM input voltage range | 48V:MPPT60-150VDC(or PWM60VDC-105VDC) | ||||
| Maximum PV array open circuit voltage | 48V:MPPT150VDC(or PWM105VDC) | ||||
| Maximum solar charging current | 60A | 80A | 80A | 80A | 80A |
| Alarm | |||||
| Low battery alarm | Audible alarm-1 beeping per second | ||||
| Overload alarm | Audible alarm-continuous beeping | ||||
| Fault | Audible alarm-continuous beeping | ||||
| Environment | |||||
| Temperature | -10~50℃ | ||||
| Humidity | C0-95%,Non condensing | ||||
| Accoustic Noise(db) | <45dB | ||||
MPPT efficiency 98%;
Auto restart when AC in recovering;
RS232 communication port & BMS RS485;
WIFI and GPRS optional;
Built in transformer, avoid overload and over voltage protection.
| MODEL | ST5048 | ST6348 | ST8048 | ST10048 | ST12548 |
| Input | |||||
| Capacity (VA) | 5000VA | 6300VA | 8000VA | 10000VA | 12500VA |
| Voltage (DC) | 48V | 48V | 48V | 48V | 48V |
| Nominal Voltage | 220VAC/110VAC | ||||
| Voltage Range | 154-264VAC/77-132VAC | ||||
| Frequency | 50-60Hz Auto sensing | ||||
| Output | |||||
| Watt | 4000W | 5000W | 6400W | 8000W | 10000w |
| Voltage | 220VAC/110VAC | ||||
| Frequency | 50/60Hz | ||||
| Waveform | Pure sine wave | ||||
| Transfer time(AC to DC) | <8ms | ||||
| Transfer time(DC to AC) | <8ms | ||||
| Output voltage regulation | 10%rms | ||||
| Bypass Mode | Yes | ||||
| Saver Mode | Yes | ||||
| Efficiency | >98% | ||||
| Protection | |||||
| Input Protection | Circuit Breaker | ||||
| Output Protection | Circuit Breaker | ||||
| Battery | |||||
| Battery Type | AGM - Deep Cycle,GEL,LIFEPO4 | ||||
| Up to 500Ah | |||||
| Charging current | 20A | 29A | 39A | 50A | 60A |
| Low Level disconnect(Selectable) | 48V:(40V or 42V) | ||||
| LCD Indicator status | Input AC,Output AC | ||||
| Battery DC,Output Load | |||||
| Alarm,Fault | |||||
| Battery Charge Level | |||||
| Output Frequency | |||||
| LED Indicator status | AC Line In:Green | ||||
| Inverter:Green | |||||
| Charging:Yellow | |||||
| Alarm:Red | |||||
| Battery low alarm | 48V:battery light discharge 46V;battery load discharge 46V@load<20%; | ||||
| 44V@load>50%/42V@load>50%; | |||||
| Battery low recovery | 48V:battery light discharge 48V;battery load discharge 48V@load<20%; | ||||
| 46V@load>50%/44V@load>50%; | |||||
| DC low voltage shutdown | 48V:battery light discharge 44V;battery load discharge 44V@load<20%; | ||||
| 42V@load>50%/40V@load>50%; | |||||
| DC high voltage alarm and fault | 64V | ||||
| DC high voltage recovery | 60V | ||||
| Maximum PV array power | 3200W | 6400W | |||
| MPPT/PWM input voltage range | 48V:MPPT60-150VDC(or PWM60VDC-105VDC) | ||||
| Maximum PV array open circuit voltage | 48V:MPPT150VDC(or PWM105VDC) | ||||
| Maximum solar charging current | 60A | 80A | 80A | 80A | 80A |
| Alarm | |||||
| Low battery alarm | Audible alarm-1 beeping per second | ||||
| Overload alarm | Audible alarm-continuous beeping | ||||
| Fault | Audible alarm-continuous beeping | ||||
| Environment | |||||
| Temperature | -10~50℃ | ||||
| Humidity | C0-95%,Non condensing | ||||
| Accoustic Noise(db) | <45dB | ||||