24vdc rectifier power supply 50A via modbus interface regulated and controllered

24Vdc output voltage rectifier module Power supply from NASN POWER can be provided from 50A - 70A.

Operation for input voltage 220Vac from 85Vac to 290Vac and it's able to be regulated via modbus interface by controller, with output voltage 24Vdc from 20V to 30V. The output current of the rectifier module can be adjusted according to the current command. The adjustment range is 1A~70A.

Communication fault more than 1 minute (Rectifier and Control monitor),A .Rectifier module output Voltage automatic recovery default Voltage 24V and limited current function not working;b.if the rectifier modules are controller by monitor and Power off, then rectifier system will power on(if the rectifier fault, it can not be turned on again).

On the front of the 24Vdc rectifier module, three LED are mounted for signaling.

1. Run ok (Green)
   

2. Temperature alarm( Yellow)

3. Fault indicator(Red)