The 125Vdc 40A power supply battery rectifiers  are designed  to offer a highly reliable power supply and charging capacity for DC electrical substation.

The model B220/125-40M2 charging all types of battery technology: NiCad (NicCd),  Lead Acid, Lithium Ion (with integral battery management connected to its  communications Bus) while supplying power to the DC load.

The  125Vdc 40A rectifier-charger charging voltage regulation is based on temperature, in float  charge, parallel operation to increase redundancy or power with the  inclusion of a decoupling diode.

The 125Vdc 40A rectifier-charger include a communication module with a TCP/IP interface (RJ45 port), and also communicate with a UTR or control center  (SCADA) through the dnp3 communication protocol.

AC Input

DC Output

Battery Charging function

· Automatic and manual charging mode selection.

· Automatic return to float charge.

· Temperature-compensated charging.

· Battery temperature sensor supplied with cable.

Protection Features

· AC input MCB with auxiliary contact.

· Charger output fuse .

· Load output MCB with auxiliary contact.

· Battery circuit MCB with auxiliary contact.

· AC and DC surge protection.

· Electronic overcurrent limiting.

· Thermal overload protection.

· DC earth-fault detection on positive and negative poles.